Save energy, money and increase the commercial value of your home with integrated external thermal insulation systems by ISOMAT.

External thermal insulation is one of the most important methods for the proper protection of your home against weather changes and wear over time. Choosing a certified and integrated external thermal insulation system, such as those available at ASLANIDIS, will have multiple benefits for both you and your building.

In addition, the application of external thermal insulation systems ISOMAT THERMOSYSTEM is easy and fast, especially if they are installed by a specialised personnel. The process takes only a few days, without disturbing your daily life or annoying your neighbours.

Finally, with ISOMAT THERMOSYSTEM external thermal insulation systems, you contribute to the environment protection, as the emission of pollutants, such as carbon dioxide, which are produced by the use of fuels for heating and cooling your home, is drastically reduced.

Responding to the continuous developments of the market but also to the ever-increasing customer needs for quality products at affordable prices, ISOMAT has developed a series of integrated external thermal insulation systems. Having 5 different systems, it offers solutions to meet even the most demanding needs and construction applications, thus reflecting its know-how and experience in the field of construction materials.

Our available ISOMAT THERMOSYSTEM external thermal insulation systems listed as following:

ISOMAT THERMOSYSTEM CLASSIC is the most cost-effective thermal insulation solution proposed by ISOMAT.

ISOMAT THERMOSYSTEM PREMIUM is the ideal solution for constructions with high requirements in ageing resistance and durability.

ISOMAT THERMOSYSTEM FLEX is the ideal solution for constructions with very high requirements in flexibility and resistance to ageing.

ISOMAT THERMOSYSTEM WOOL is the ideal solution for constructions with high requirements in fire protection, as mineral wool is highly fire-resistant.

ISOMAT THERMOSYSTEM XPS is the ideal solution for constructions with high requirements in high mechanical resistance and durability.


Easy easy application in 6 steps

1. The aluminium holding rail is placed around the building and parallel to the ground, being fastened on the substrate with special anchors (2 pieces/linear metre).

2. Next, the adhesive (ISOMAT AK-T35) can be applied on the thermal insulation boards (EPS, XPS, MINERAL WOOL) in 2 different ways:

a) Universally on the surface of the plate with a notched trowel, if the substrate is smooth.

b) Along the perimeter of the board and in 2 or more spots in its centre, using a trowel, if the substrate is uneven.

3. The thermal insulation boards (EPS, XPS, MINERAL WOOL) are then bonded by being placed from bottom up, in horizontal, consecutive layers overlapping each other so as to form a layout of crossed joints that will prevent cracking of the overlaid render.

4. The following day, the thermal insulation boards (EPS, XPS, MINERAL WOOL) are mechanically fixed with collar head anchors, the length of which is selected according to the thickness of the board and the type of the substrate.

5. Next, the base coat (ISOMAT AK-T35/T55/THERMO ACRYL/T65) is applied universally on the boards, by means of a notched trowel in strips wider than 1m. Afterwards, the fiberglass mesh is placed and pressed on the still fresh layer of the base coat with a smooth trowel.

6. After the base coat has fully dried, the surface is primed with the primer of the respective render that will be used. After the primer has dried, the surface is then coated with the pasty, acrylic, silicone or silicone-silicate renders MARMOCRYL of ISOMAT.