- PRODUCT CODE: 006154
- In Stock
The lightest high-performance saw in the 70 cm³ cubic capacity class. Extraordinarily easy to manoeuvre, with outstanding acceleration. For felling and pruning in medium-density and high-density stands.
3 Interest-free installments from €35 to €1,000
4 Interest-free installments from €20 to €200
3 to 60 installments up to €10,000
>>
STIHL M-TRONIC
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary, thanks to electronic cold/warn start recognition, now there is only one start position on the combi lever. The engine starts after fewer pulls and with no change of position and can immediately accelerate up to speed even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
>>
ANTI-VIBRATION SYSTEM
Intense vibration at the handles of power tools can lead to long term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
>>
CAPTIVE NUTS
When changing the cutting attachment, you will not risk losing the nuts on the sprocket.
>>
DECOMPRESSION VALVE
The decompression valve is part of the easy starting system, the valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-starting, but then closes automatically.
>>
COMPENSATOR
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carbutettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occurs.
>>
PRE-SEPARATION AIR FILTRATION SYSTEM
Stihl long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
>>
REDUCED EMISSION ENGINE TECHNOLOGY
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. Thie results in more power with a lower weight, up to 20 lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
>>
SIDE CHAIN TENSIONER
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
>>
TOOL FREE FILLER CAPS
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
View Also...
Don't forget these!
