Cementitious Waterproofing

Description

Highly flexible, 2-component, polymer-modified, waterproofing cement-based slurry. Similar to AQUAMAT and even more suitable for waterproofing of surfaces that show or are expected to show hairline cracks caused by expansion-contraction or vibration, such as flat roofs, swimming pools, tunnels, above ground tanks, etc. Ideal for waterproofing under tiles in combination with the tile adhesive ISOMAT AK-ELASTIC.


Product Details

Recommended for

• It is used for waterproofing surfaces made of concrete, plaster, bricks, cement blocks, terrazzo, gypsum boards, wood, metal, etc. Ideal in cases where high flexibility and good adhesion of the waterproofing layer are required
• Suitable for waterproofing substrates subject to expansion-contraction or vibration and show or are expected to show hairline cracks, such as flat roofs, balconies, above ground water tanks, swimming pools, inverted roofs, etc
• It can also be used for waterproofing basements, internally or externally, against humidity or water under pressure

Features & Benefits

AQUAMAT-ELASTIC is a two-component, highly flexible, brushable waterproofing slurry consisting of a cement-based powder mortar (component A) and an emulsion resin (component B). After hardening, it forms a seamless, jointless membrane, with the following advantages:

• Crack-bridging ability
• Total waterproofing against positive hydrostatic pressure up to 5 atm according to EN 12390-8. It can also withstand negative pressure
• Vapor permeability
• Suitability for potable water tanks, as well as food contact surface according to W-347
• Resistance to UV radiation
• Protection of concrete from carbonation
• No corrosive effect on the reinforcing steel in concrete
• Resistance to sewage water (sewage water treatment plants, sewers, etc.)
• Resistance to aging
• Bonding to slightly wet surfaces without priming
• Simple and low cost application
• Suitability for green roofs, flower beds, etc., as it is certified as root-resistant
• Also works as a radon barrier

Certification

Certified according to EN 1504-2 and classified as coating for surface protection of concrete.Certificate No.: 2032-CPR-10.11
Certified according to ΕΝ 14891 and classified as liquid-applied, two-component, water-impermeable product CM O2P for waterproofing under tiles, in external installations (walls and floors) and swimming pools
Certificate No.: 18/18172-2980 & 20/22565-1686, APPLUS Laboratories. CE marked
Certified as root-resistant, according to UNE CEN/TS 14416 EX: 2014
AQUAMAT-ELASTIC has been tested by the accredited German Institute MFPA Leipzig and complies with the wet duty classifications A0 and B0 in accordance with the ZDB technical directive 2010 "Verbundabdichtungen" for waterproofing under plates and tiles in household wet areas, balconies and flat roofs
Certification No.: P-SAC 02/5.1/16-127 as waterproofing system under plates and tiles, P-SAC 02/5.1/16-129 as waterproofing systems for buildings
Complies also with the requirements of the German building regulation DIN 18195-2 Tab. 7 & 8 (crack bridging, bonding, waterproofing, resistance to alkalis, etc.) for waterproofing under plates and tiles, as well as waterproofing of building structures
AQUAMAT-ELASTIC has been also tested and approved by the German Institute TÜV Rheinland LGA Bautechnick GmbH for being resistant, when in contact with sewage water
It has also been tested and approved as a radon barrier by the Federal Budgetary Scientific Institution, Saint Petersburg Professor P.V. Ramzaev, Scientific Research Institute for Radiation Hygiene

Consumption

2,0-4,0 kg/m²